Description

Wiring harness for controlling the ignition module and coil in the Peugeot 205 phase 1. Used in various types of 205 including the GTI.

Original and quality

The wiring harness has the original dimensions and is 100% new.

The red 1-pole plug was originally usually yellow, sometimes different in colour. Yellow is not available, which is why we use red.

For strength and to prevent corrosion and short circuits, each connection between copper conductor and cable lug is finished with heatshrink tubing. This is our standard procedure. As a result, our wiring harnesses are characterised by an extra-long and reliable service life.

Location and connection of ignition module/coil wiring harness

The wiring harness is connected to the main wiring harness in the engine cabin via the white 2-pin plug. The wiring harness controls the ignition module and ignition coil.

Overview of the connections

• Plug white 2-pole Male | Coupling with main wiring harness
• Connector black 7-pin Female | Ignition module connection
• Plug black 3-pin Female | Ignition housing power distributor
• Plug to wire purple | Ignition coil
• Plug to wire blue | Ignition coil
• Eyelet M6, wire yellow / green | Ground