Description
Complete wiring harness set for the Citroën Traction Avant 7.
New versions of the Citroën Traction Avant 7 were brought out very quickly. Only a few weeks, from 3 May 1934 to June 1934, the 7A was produced. This came in the Berline, Roadster and Faux Cabriolet versions. In June 1934, the 7B followed with a more powerful engine than its predecessor. It was soon followed by the 7C, which was almost identical to the 7B. Only the holes in the mudguards for the horns were different.
There was also the 7S, or the 7 Sport version, which had a higher top speed than its predecessors. The top speed was 109 km/h where it used to be 100 km/h. The 7S was produced from June 1934.
Because of the many versions that succeeded each other quickly, there are also many (small) differences in the wiring. On top of that, these pre-war Tractions did not have direction indicators and only 1 light was placed at the rear, on the left side of the bumper. Nowadays, therefore, some customisation is required to make the car comply with current legislation.
Specific custom work for the Traction Avant 7 wire harnesses
We will contact you after your order about the specific version of your Citroën Traction Avant 7. We will then make the wiring harness exactly to your model and requirements. Customisation is required for the choice of indicators on the wings or on the bumpers. You may wish additional lights or perhaps horns etc. Given the many versions in the Traction Avant 7, the price is on request.
Original finish
All wires and bundles are professionally finished with insulation and heatshrink tubing in the original colours. You can optionally choose to finish with PVC insulation tape or linen tape. This way you maintain a nice classic look and a guaranteed long life.
Contents cable harness kit Traction Avant 7
A complete set of wiring for the Citroën Traction Avant 7 consists of:
- Headlamp sections left & right with ground wires
- Dashboard wiring harness
- Roof wiring harness
- Possible extra wires for specific needs and adjustments
- Appropriate electrical diagram
- Installation manual
The cable booms do not include new battery cables and spark plug cables. A battery cable set for the Traction Avant can be found here.
Ignition cables for the Traction can be found here find.
Do you have additional requirements such as rear fog lights, additional lights such as spotlights, etc.? No problem at all. You can already indicate your wishes in the comments field during checkout.
Reviews
There are no reviews yet