Description

Wiring harness set complete for the Citroën Traction Avant 11BN until 1952.

Ready to fit and ready for installation.

This version of the Traction Avant was also known as the 'Wheel' because the spare wheel was visibly mounted on the back of the car. All cables are custom made for this version.

A complete wiring set consists of:

• 2 Headlight pieces L & R with ground wires
• Dynamo wiring harness
• Dashboard wiring harness
• Roof wiring harness
• Rear wiring harness with ground wires
• Appropriate electrical diagram
• Installation manual (only available in Dutch)

These are all the wire harnesses you will need to completely refurbish your Traction Avant 11BN.

Everything is professionally finished with insulation and heat shrink tubing in the original colors for a nice classic look and a guaranteed long life.

Direction indicators

A wiring loom set for the Traction Avant always comes with wires for turn signals.

Even though the car did not have direction indicators from the factory like the types until 1952.

A pre-1952 Traction has no factory-installed direction indicators (RAWs).

Of course, these were added later, but that could be in different places:

RAW's front

• On the front mudguards, in place as installed by the factory after 1952
• On the bumper in front

RAW's backside

• On the C-pillar, at the spot as placed by the factory after 1952
• On the rear mudguards
• On the bumper behind

Direction indicator switch

• In the dashboard, in the place as placed by the factory after 1952
• To the left of the instrument panel

We have already seen all the above possibilities in recent years.
Therefore, we cannot stock this set and have to customise it.
We request that you send us pictures of the placement of the RAWs front and rear and the location of the RAW switch in the dashboard.
As a result, the delivery time will be 4-5 weeks after receiving the correct data.

Additional requirements

Do you have any additional requirements such as rear fog lights, extra lamps etc? No problem at all.

You can indicate your wishes in the comments field during checkout.

We will then contact you so that we can go over the necessary adjustments with you.

The product picture may differ.